Cypress CSC-1200T Dokumentacja Pobierz pdf (Strona 10)

3) 3.5mm Mini-jacks: Connect to source's L/R output with 3.5mm

mini-jack for audio signal conversion.

Note: For HDMI signals you can select in the OSD Menu whether

you require audio from the HDMI (AUTO) or from the analog audio

inputs (EXT)

4) YCbCr/YPbPr + L/R: Connect to source equipment such as a

DVD player for both video and audio signal conversion.

5) CV + L/R: Connect to a composite video source such as a

video/DVD player for both video and audio signal conversion.

CONTROL: This port is the link for Telnet or Web GUI controls,

connect to an active Ethernet link with an RJ45 terminated cable

POWER: Switch this power toggle to turn on and activate the

device or turn off to shut it down.

DC 5V: Connect the power adaptor included in the package to

the device and plug it into an AC wall outlet for power supply.

6.3 Remote Control

POWER: Press this button to switch the

device on or to set it to standby mode.

HDMI1/2/3, PC1/2/3, CV and COMP:

Direct source selection keys. Press one

of these keys to switch to the required

source.

MENU: Press this button to enter the OSD

menu.

EXIT: Press this button to exit the menu or

the current selection in the OSD menu.

OK & ▲▼◄►: Press OK to conrm the

selection or press the arrow buttons to

navigate the OSD menu. When the OSD

menu is not active, use the LEFT/RIGHT

(◄►) to control the volume level.

AUTO ADJUST: Press this button when the image being outputted

does not correctly t the display's screen. The device will auto

adjust the image to ll the screen.

RESET: Press this button to reset the device back to the default

settings.

CR-122

POWER

EXIT MENU

RESET

AUTO

ADJUST

PC1PC2 PC3

CV COMP

HDMI2HDMI1 HDMI3

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Komentarze do niniejszej Instrukcji

Brak uwag

Cypress CSC-1200T Dokumentacja Strona 10

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Odbiornik Cypress CSC-1200T